Tape & Reel Specifications For HEA & HEAL Series Resistors

FAQ’s

(These taping specifications have been formulated based on broad guidelines extracted from DIN-IEC-286-1standards)

Where
“a” stands for the width of the tape.

“b” stands for inner distance between two tapes.

“c” stands for outer distance between two tapes.

“e” stands for the inner distance of the reel.

“f” stands for the total width of reel.

“S” stands for the pitch between resistors.

Note:

1. The maximum difference between D1 & D2 is 1.40 mm.
2. All dimensions stated below are in mm.
3. Dimensions ‘e’ & ‘f’ are given as approximate guidelines only.

HTR SERIES	a ±1	s ±0.5	b ±2	c ±2	10XS ±2	e	f	NUMBER OF PIECES
HTR SERIES	a ±1	s ±0.5	b ±2	c ±2	10XS ±2	e	f	PER AMMO PACK	PER MASTER CARTON
C2A	6	10	63	75	100	80	88	1000	4000
LC4 C4	6	10	82	94	100	98	106	1000	4000
LC5 C5B	6	10	89	101	100	105	113	1000	4000

Approximate dimension of the carton containing the reel is: 330mm x 125mm x 335mm.
Approximate dimension of the master carton: 630mm x 330mm x 360mm.
Number of cartons packed in a master carton: 4 nos.

Marking

The resistors will be marked with suffix ‘TR’ after the type.