SELECT LANGUAGE:
Disclaimer

Blog

Comparison Between Metal Plate & Ceramic Type Hvac Motor Control Resistors

Simply put, these are tailor made resistors having 3 distinct resistance values which translates into controlling the Blower Motor speeds of an Automotive Air-conditioner. These resistors are mounted in the Air Flow of the Air-conditioner module and the reason behind this is, to keep the resistor as cool as possible. In the case of a […]

Posted in Blog | Comments Off on Comparison Between Metal Plate & Ceramic Type Hvac Motor Control Resistors

Techno/Economic Comparison Between Silicon/Cement Coated Wire Wound Resistors And Ceramic Encased Resistors

Traditionally Wire Wound Resistors meant coated resistors of either silicon or vitreous enameled on a Ceramic body which was wound with resistance wire which was welded or soldered to the terminals and these types of resistors were termed as professional or industrial grade Wire Wound Resistors. However in the mid 1970’s there was a demand […]

Posted in Blog | Comments Off on Techno/Economic Comparison Between Silicon/Cement Coated Wire Wound Resistors And Ceramic Encased Resistors

Why Are Capacitor Discharge Resistors Now Mandated As Essential Safety Device

In Electronics, Capacitor discharge resistors or Bleeder resistors are resistors connected in parallel with the output of a high voltage power supply circuit with the express purpose of discharging the residual electric charge stored in the filter capacitors of the power supply. As an example, a switch mode power supply uses a bridge rectifier to […]

Posted in Blog | Comments Off on Why Are Capacitor Discharge Resistors Now Mandated As Essential Safety Device

Types Of Fusible Wire Wound Resistors and Ordering Information Required

A fusible resistor is a tailormade dual purpose component – In normal conditions it functions as resistor In high overload/fault conditions it acts as a fuse/safety device There are basically two types of fusible resistors: Tailor made fusible resistor to suit a customers particular application Safety fusible resistor (a) Tailor Made Resistors In order to […]

Posted in Blog | Comments Off on Types Of Fusible Wire Wound Resistors and Ordering Information Required

Comparative Performance between Thick Film and Electron Beam Welded Metal Band Resistor Technologies when used in Automotive Applications.

These current sense resistors are predominantly used in automotive application in the DC/DC convertor output block and in battery management. The basic circuitry followed is that these low ohms resistors are connected in series with the load, and the potential difference between both terminals are measured by an IC to determine the quantum of current flow. The […]

Posted in Blog | Comments Off on Comparative Performance between Thick Film and Electron Beam Welded Metal Band Resistor Technologies when used in Automotive Applications.

Comparative advantage of Wire Wound Technology over Film Technology in Fusible Resistor applications

Fuse Resistors serve a dual purpose, as a resistor and also a fuse. They are designed so that they will open with a large surge of current without any flame or other untoward incident.Fusible film resistors are generally used for lower power requirements and applications where the overload and surge handling requirements are not too […]

Posted in Blog | Comments Off on Comparative advantage of Wire Wound Technology over Film Technology in Fusible Resistor applications

Low Ohmic / Current Sense Resistors for Automotive Applications

  The demand for these types of resistors has increased in the automotive sector with the proliferation of Hybrid and Electric cars and in the sector in general due to the enhanced level of computerization and sophistication of various control systems.To meet this enhanced demand, HTR has introduced a wide variety of Electron Beam welded […]

Posted in Automotive Applications, Blog | Comments Off on Low Ohmic / Current Sense Resistors for Automotive Applications

Use of Current Sense Resistors for Battery Management in Automotive Applications.

In automotive applications the requirement of electronic circuits for battery charge monitoring for the detection of the remaining battery level and over current protection has now seen a steep spike in demand with the recent proliferation of Hybrid and Electric vehicles.Typically these low ohm resistors are used in this applications for current sensing by connecting […]

Posted in Automotive Applications, Blog | Comments Off on Use of Current Sense Resistors for Battery Management in Automotive Applications.

Application / Design Notes on Selection of Wirewound Resistor

BASICS Simply put, a resistor is an electronic component connected into an electrical circuit to insert a specific resistance. Resistance is measured in ohms and as per ohms law, the current through the resistor will be directly proportional to the voltage across it and inversely proportional to the resistance. As the current flows through the […]

Posted in Automotive Applications, Blog | Comments Off on Application / Design Notes on Selection of Wirewound Resistor
HTR Resistor Finder Apps For You HTR Resistor Finder - iOS App HTR Resistor Finder - Android App HTR Resistor Finder - Web App
© 2014 Copyright Hi-Tech Resistors Pvt. Ltd.
Digital Marketing By CONVOMAX.